Skip to content

Natural Stone Tile

The veins in polished marble catch the light across a floor. Tumbled travertine has softly rounded edges, and cleft slate shows its layers. Compare a few pieces in your room, then check which finishes suit your floor, shower wall or backsplash.

Polished Empress Green marble floor with pale veining beside a sofa and low stool

Browse by Stone Type

Eleven distinct stone families, each with its own color palette and performance profile

Also explore: Soapstone Slabs · Pebble Tile

Featured Natural Stone Tile

Ivory travertine courtyard pavers with softly tumbled edges under an olive tree

Travertine Tile and Pavers

Travertine ranges from pale ivory to walnut brown. Filled, honed field tile has a smoother surface, while tumbled edges give pavers a softer outline. For a pool surround, select pavers specified for exterior wet use and coping sized for the pool edge.

Marble Patterns and Shapes

A marble floor can read as a quiet field of color or a pattern of contrasting veins. Compare several pieces together. Larger formats emphasize continuous veining, while hexagons and mosaics divide the pattern into smaller details.

By application:

White marble herringbone floor framed by a straight marble border at a wooden doorway

Marble by Name

Iconic stone varieties, each with its own veining, color, and origin story

Also explore: Calacatta Porcelain Tile

Marble by Color

Find the marble that matches your palette

Low steps of silver travertine showing horizontal gray and taupe bands

Silver Travertine

Silver travertine varies from cool gray to silver and beige. Look at how the banding runs across several pieces. The tile and paver collections offer different thicknesses and finishes for interior and exterior layouts.

Natural Stone by Format

Tile, pavers, mosaics, veneer, and coping — each format serves a different purpose

Pavers by stone type: Travertine Pavers · Silver Travertine Pavers

Natural Stone Tile by Application

Stone selections curated for specific spaces and surfaces

Slate and Limestone

Slate often has a naturally layered surface. Limestone usually shows more subdued color changes and may contain visible fossils. Compare the actual finish and thickness when choosing stone for floors or wall cladding.

Dark cleft slate beside a pale honed limestone sample on a workbench
Bathroom with pale limestone wall tile, a dark slate tile floor and an oak vanity

Choosing Stone for Floors and Walls

Start with the room and the surface. A shower wall, shower floor and outdoor path each require a tile approved for that use. Check the product specifications with your installer before selecting a size or finish.

A polished finish reflects light and highlights veining. Honed stone has a matte face. For a wet floor, check the individual product’s wet-use rating.

View samples in the room’s light and compare them with the grout and adjoining surfaces. Ask your installer about sealing, substrate preparation and the quantity needed for the layout.

Natural Stone Buying Guide

Match Stone to the Room

Consider expected foot traffic for a floor, splashes for a backsplash and moisture exposure for a shower. Check the specification for each surface.

Compare Finishes

Polished stone reflects light. Honed stone has a smooth, matte face. Tumbled and brushed finishes bring out edges and surface texture.

Check Outdoor Suitability

Check the exterior, wet-use and freeze-thaw information for your climate. This can vary between products made from the same stone.

Plan for Stone Care

Ask whether your stone needs an impregnating sealer. The stone, its finish and exposure determine the product and maintenance schedule.

Allow for Cuts and Repairs

Have your installer calculate an allowance for the pattern, cuts and any pieces you want to reserve for repairs.

Review the Layout

Dry-lay pieces from several boxes to balance shade and veining. Check thickness transitions where stone meets wood, carpet or another tile.

Natural Stone Guides & Articles

Expert insights to help you design with confidence

View all articles

Natural Stone Tile FAQ

Choosing a stone

What types of natural stone tile do you carry?
Browse marble, travertine, limestone, slate, granite, basalt, onyx, sandstone, quartzite and dolomite. Available formats vary by material. The soapstone collection includes slabs.
How does natural stone tile compare with stone-look porcelain?

Quarried stone varies from piece to piece, even within one box. Porcelain is fired clay with a surface design that can repeat. Lay out several samples of each, then compare the care instructions. Porcelain usually needs little routine care, while some natural stone benefits from sealing. Our guide compares natural stone and porcelain tile in more detail.

What is the difference between marble and granite?
Marble often shows visible veining and can etch on contact with acids. Granite commonly has a crystalline or speckled appearance. Check the individual product’s finish, recommended uses and care guide when choosing between them.
How do Calacatta, Carrara and Thassos marble look different?
Look at the veins first. Calacatta marble often has broad, contrasting veins, while Carrara marble tends to have finer gray lines. If you want a bright white surface with little visible veining, try a sample of Thassos. Set it beside your grout and cabinet finish in the room’s own light.
How do travertine and limestone compare?
Run a finger over unfilled travertine and you can feel its natural pockets. Filled travertine has a smoother face. A fine-grained limestone tile may look even from across the room and reveal tiny fossils up close. For gray or taupe tones outdoors, look at silver travertine pavers in the finish you plan to order.
How do slate and granite look in an entryway?
Light from the door brings out the slight ridges in cleft slate. In granite, the pattern comes from mineral grains that range from fine speckles to large crystals. If the entry gets wet, check the recommended use and finish on the specific tile.

Floors, showers and backsplashes

Can I use the same stone tile on the floor and the wall?

Check the intended use for the exact stone, size and finish. A wall tile may be too delicate or too smooth underfoot. Start with stone floor tile for the floor, then compare the matching wall finish. Ask the installer to check thickness where different materials meet.

Which natural stone should I choose for a bathroom?

Decide which surface you are covering. For a vanity wall, compare how the veining looks beside the countertop. For a bathroom floor, check whether the finish is suitable for wet foot traffic. Browse bathroom marble tile and stone shower tile for samples to compare.

What should I check before choosing natural stone for a shower floor?

Look for explicit approval for a wet, barefoot shower floor in the product specifications. Wall approval alone does not cover the floor. Small stone mosaics can follow a sloped shower base more easily. Have your installer check the tile, its backing and the drain layout against the waterproofing system.

Is natural stone a practical kitchen backsplash?

Look at the surface as well as the color. A smooth stone backsplash is easier to wipe after cooking than a deeply textured one. Behind the stove, try a spare piece with the cleaner recommended for the stone. Tomato sauce and lemon can dull acid-sensitive stones such as marble or limestone.

Which natural stones can I use outdoors?

Choose a product rated for the site. A covered patio, a wet pool deck and a path exposed to freezing winters have different demands. Ask the supplier to confirm use in your climate and check the finish when wet. Browse stone pavers for walking surfaces and pool coping for the edge.

Finishes, care and ordering

How do honed, polished and tumbled stone tiles differ?

Polished stone reflects the room and brings out the color of the veining. Honed stone has a smooth face and a softer sheen. Tumbled stone has worn-looking edges, and brushing can add texture to the surface. Compare the samples in daylight and check the specific tile’s approved use for a wet floor.

How do I clean natural stone tile, and does it need sealing?

Sweep or vacuum up grit and blot spills promptly. Clean with a pH-neutral stone cleaner, then rinse and dry. Ask your supplier if the stone needs an impregnating sealer and when to reapply it. Marble, limestone and travertine can still etch if vinegar or lemon touches the surface. See our natural stone sealing guide.

How do I clean natural stone shower tile?

After a shower, use a soft squeegee to remove water from the walls. To clean accumulated soap film, choose a non-acidic cleaner labeled for the stone, follow its dilution instructions, and rinse well. Keep vinegar and acidic limescale removers away from marble, travertine and limestone.

Is a dull mark on marble a stain or an etch?

A darkened patch can be a spill that has soaked in. A pale, dull patch that catches the light differently can be an etch, where an acid has affected the surface. Blot a fresh spill rather than scrubbing. For a persistent mark, identify the stone and ask a stone-care specialist before treating the finish.

Why do tiles cut from the same stone look different?
Veins, mineral grains and fossils change across a block of stone. One piece of marble might have a sweeping vein while the next is nearly plain. Lay several pieces together before installation to see the range. If you’re considering stone-look tile as well, compare the patterns side by side in your room.
When should I choose stone mosaics, veneer, pavers or coping?
A stone mosaic breaks the pattern into small pieces and makes the grout lines more visible. For a wall with depth, compare stone veneer with the stacked strips in ledger panels. Around a pool, pavers cover the deck and coping finishes its edge. Compare samples together and ask your installer to check the thickness and edge profile.
How much extra natural stone tile should I order?

Measure each area in square feet. Have your installer add an allowance for the layout, cuts, vein matching and spare pieces. Divide the adjusted area by the coverage per carton, then round up. When the boxes arrive, lay out pieces from several boxes together before installation to distribute variations in shade and pattern.